BLUETOOTH ADAPTER CAN'T PAIR WITH YOUR DEVICES? Reset Instructions

  • Reset TT-BA01
    Please clear the pairing history by pressing the Power Button twice when the transmitter is on until the LED indicator flashes red and blue alternately. Then restart the transmitter to pair again. You may need to try this a few times if it does not work on your first attempt.
  • Reset TT-BA10

    If the transmitter cannot pair with your Bluetooth device, please kindly clear the pairing history by pressing the Multifunction Button when the transmitter is off until the LED indicator flashes red and blue simultaneously twice. Then restart the transmitter to pair again.

  • Reset TT-BA07/TT-BA08/TT-BA09/TT-BA12 in TX Mode:

    Please switch the mode (switch to RX, then switch back to TX ) after it is turned off for 5 seconds and reset your headphones or speakers, then restart:

    1. Place Bluetooth headphone/speaker in "Pair Mode" and within 3 feet of the transmitter firstly.

    2. Press and hold the Power Button for 5 seconds (LED flashes blue slowly) and tap twice to enter pairing mode (LED flashes red and blue alternately).

    3. The two devices would connect with each other automatically, the Blue LED stays solid.

    4. Connect the transmitter into your non-Bluetooth devices like TV or iPod, the audio would be transmitted to your stereo!

    Please make sure that any other Bluetooth signal around is turned off.

  • ResetTT-BA07/TT-BA08/TT-BA09/TT-BA12 in RX Mode:

    Please switch the mode (switch to TX, then switch back to RX ) after it is turned off for 5 seconds, then restart:

    1. Press and hold the Power Button for 5 seconds (LED flashes blue slowly) and tap twice to enter pairing mode (LED flashes red and blue alternately).

    2. Activate the Bluetooth function on your phone and search for the nearby Bluetooth devices:

    • For iOS: Settings > Bluetooth:On > Scan for devices
    • For Android: Settings > Wireless & Networks > Bluetooth: On > Scan for devices

    3. Find “TaoTronics TT-BA07/TT-BA08/TT-BA09/TT-BA12” in the search results and tap on it to connect. Once connected, the LED indicator will turn solid blue.

    4. Connect to the headphones jack of your non-Bluetooth devices such as the wired headphones/speaker, you will hear sound out from the stereo.

  • Reset TT-BA11

    Please clear the history by pressing and holding the Multifunction Button when the transmitter is off until the LED indicator flashes purple twice. Then restart the transmitter to pair again.

    If the transmitter does not enter pairing mode after turned on, press the Multifunction Button twice to start pairing.

  • What to do when the adapters can’t be turned off?

    Please kindly press and hold the MFB of the Transmitter, and at the same time plug the Transmitter into an outlet to get charged for 5 seconds. Please note the power has to be inserted at the same time the button is held down.