Car Phone Mount for CD Player Slot, TaoTronics Phone Holder for Car, CD Slot Phone Mount, CD Player Phone Mount, Smartphone Holder with Silicone Pad Clip, One-Click Release Button
  • Car Phone Mount for CD Player Slot, TaoTronics Phone Holder for Car, CD Slot Phone Mount, CD Player Phone Mount, Smartphone Holder with Silicone Pad Clip, One-Click Release Button
  • Car Phone Mount for CD Player Slot, TaoTronics Phone Holder for Car, CD Slot Phone Mount, CD Player Phone Mount, Smartphone Holder with Silicone Pad Clip, One-Click Release Button
  • Car Phone Mount for CD Player Slot, TaoTronics Phone Holder for Car, CD Slot Phone Mount, CD Player Phone Mount, Smartphone Holder with Silicone Pad Clip, One-Click Release Button
  • Car Phone Mount for CD Player Slot, TaoTronics Phone Holder for Car, CD Slot Phone Mount, CD Player Phone Mount, Smartphone Holder with Silicone Pad Clip, One-Click Release Button
  • Car Phone Mount for CD Player Slot, TaoTronics Phone Holder for Car, CD Slot Phone Mount, CD Player Phone Mount, Smartphone Holder with Silicone Pad Clip, One-Click Release Button
  • Car Phone Mount for CD Player Slot, TaoTronics Phone Holder for Car, CD Slot Phone Mount, CD Player Phone Mount, Smartphone Holder with Silicone Pad Clip, One-Click Release Button
  • Car Phone Mount for CD Player Slot, TaoTronics Phone Holder for Car, CD Slot Phone Mount, CD Player Phone Mount, Smartphone Holder with Silicone Pad Clip, One-Click Release Button
  • Car Phone Mount for CD Player Slot, TaoTronics Phone Holder for Car, CD Slot Phone Mount, CD Player Phone Mount, Smartphone Holder with Silicone Pad Clip, One-Click Release Button
TT-SH019

Car Phone Mount for CD Player Slot, TaoTronics Phone Holder for Car, CD Slot Phone Mount, CD Player Phone Mount, Smartphone Holder with Silicone Pad Clip, One-Click Release Button

  • ( 1,383 Reviews )
  • Price: $ 10.99
    Price: £ 10.99
    Price: CDN$ 16.99

Country :

Buy from Amazon Buy from Amazon Buy from Amazon
  • 【Advanced Protection】Rely on the silicon pad to secure your smartphone and avoid accidental drops even on bumpy roads; benefit from a snug fit while preventing scratches

  • 【One-Hand Operation】Release your smartphone with just one hand thanks to the side mounted release button; benefit from a gradual release and avoid dropping your phone

  • 【Adjustable Design】Rotate the support’s ball joint up to 360° to always get the most suitable viewing angle; enjoy a 2-way insertion design that won’t obstruct the CD player’s accessibility

  • 【Ingenious Construction】Easily install the car mount and avoid all interference with the CD player; adjusts from 0.1in to 5.51in to suit virtually all CD players

  • 【Vast Compatibility】Benefit from an adjustable construction that suits all smartphones between 1.97" - 3.94" in width; seamlessly adjust the support’s arms to get the perfect fit

  • Reviews
  • (4.6 Score)
  • Top notch - Tao tronics iPad (but also good for android windows and kindle =) stand.
    By bigdady
    on October 18,2015
    I want to start by saying, I bought these with my own money, I am not on the vine program and I'm doing this review to try to help my fellow consumers make a informed choice on how to spend their hard earned cash. Tao tropics really hit it out of the ballpark with this
    I want to start by saying, I bought these with my own money, I am not on the vine program and I'm doing this review to try to help my fellow consumers make a informed choice on how to spend their hard earned cash. Tao tropics really hit it out of the ballpark with this tablet/phone stand, so usually a company like TT doesn't mean a lot to most consumers, but Amazonian's specifically techie amazonian's know the name and know it well, I saw these the other day as one of the steals of the day 8 bucks each I think, I grabbed 2 with the idea of keeping one and giving the other to Mrs. BigDady but after having these for a few days I think the Mrs. is out of luck (she's out of town.) I've purchased so many of these stands over the years and thrown out many after breaking or worse breaking a tablet or putting one of my tablets in danger of falling off and being damaged, and as well the ones that sit in my various junk drawers, which is why I love this stand QUALITY with big capital letters. Pros. 1.Nice combination of metal and plastic build, it has a nice amount of heft without being to heavy which means good engineering if you take a close look you can see what I mean, everything is tight all gaps are evenly spaced with no Variations between the two units I purchased. 2. Multi position kickstand is very smooth and consistent, its extremely versatile and gives you plenty of angles to find the right position for whatever task is at hand, the Mechanism to actuate the kickstand is nice no kinks and seems to be high quality and durable. 3. The cutout on the kickstand lets you hang it on a wall giving yet another option and added value. 4. The cradle that holds your device is made of some type of rubber that's feels good and won't scratch the cutouts and design let you route charging cords and data cables in a neat and orderly way, the only thing I would change is perhaps a millimeter or two deeper and maybe a millimeter more higher on the front lip of the rubber this is my personal opinion and I am in no way a engineer so take it at face value. 5. It looks good while maintaining its functionality. Cons. So far none that I have encountered, I will update if necessary if problems occur. Summary. I have had these a few days and they are great, I've used them to hold, nexus 7 2nd gen works great in both landscape and portrait mode , a Samsung galaxy note 10.1 2014 edition in landscape and portrait mode no stability issues, Microsoft surface pro 2 again both landscape and portrait no stability issues, just watch your angles in portrait this is a heavy computer and it handled it well, nexus 5 and Samsung galaxy note 4 all with no problems, that's what I call versatility. I think that these will hold up very well over time I plan on buying a few more for my workshop and my desk at work, one of them will go in the bathroom hung on the wall for convenient bathroom reading and perhaps a few for gifts including Mrs. BigDady. Five stars to Tao tronics for this excellent gadget stand.
  • The Perfect Stand
    By RAWREVIEWS
    on December 8,2015
    I own an iPad Pro. I absolutely love it. I also have a few accessories for my iPad Pro. Such as multiple cases, in which a couple of them have built in stands with them. I use those types of cases on my iPad Pro at my office for work because they're easy and quick to set up and
    I own an iPad Pro. I absolutely love it. I also have a few accessories for my iPad Pro. Such as multiple cases, in which a couple of them have built in stands with them. I use those types of cases on my iPad Pro at my office for work because they're easy and quick to set up and they offer total protection for my iPad Pro. Now when I come home from work, those cases aren't the best cases to use because they're a tad bulky. Please don't get me wrong, they're great cases and I love them, but when I'm sitting on my couch I want my iPad Pro to be a little less bulky. To solve that problem (the bulk issue) I ordered two different iPad Pro accessories. The first thing I ordered was a silicone case that protects the bumpers and back of the iPad. The second item I ordered was this iPad stand by TaoTronics and it's comes with a portable tablet smartphone Stand (Adjustable Kickstand, Aluminum Body, Multi-angle). The reason I decided to order this stand was because I don't like to have to be switching cases every single day (it becomes very cumbersome). With this stand, it allows me to keep the light silicone case on my iPad Pro and when I get to work I use this TaoTronics stand to hold my iPad Pro up. This stand is a very handy product for my iPad Pro (you can basically use it for any tablet or smart phone as well). It's easy to commute with because it's not big and it's not very heavy. The stand easily fits into one of my pockets in my briefcase (making it easy to take back forth between my home and office). The company who I ordered this iPad Pro stand from was Sunvalleytek. Once I ordered the stand, Sunvalleytek quickly shipped it and it was at my front door in under two days. Here are some more attributes of this stand: *With this stand you can easily adjust the kickstand to give you maximum convenience and with the best viewing angle for your table or smartphone *The way the stand is designed, you can use your cables to charge your smart device without any interference *As I mentioned earlier, I use this stand at my office; however, it would be perfect for watching movies, videos, looking at photo's, etc. *The stand is mainly designed with aluminum main body, but it also has rubber pads and feet which will protect your smartphone or tablet from scratches or sliding They're a number of uses one could get from this stand. I use it for my new iPad Pro (mainly at my office these days), but again, if you own a smartphone or tablet, this stand is compatible with those devices as well and I'm sure you'll find various uses for this TaoTronics stand.
  • This portable tablet/smartphone stand is a very good stand for its price
    By HardwareGuru
    on December 10,2015
    This portable tablet/smartphone stand is a very good stand for its price. There are a few things that some people will wish it was different/better. One thing I noticed was the rear support stand that folds is made of plastic. People will assume it is all metal but, it’s not.
    This portable tablet/smartphone stand is a very good stand for its price. There are a few things that some people will wish it was different/better. One thing I noticed was the rear support stand that folds is made of plastic. People will assume it is all metal but, it’s not. Also, when you place a smartphone in portrait mode to charge the phone, some micro usb connectors tend to vary in length . The phone may not rest totally flat on the stand due to the micro usb connector/cable pressing on the surface. If the 2 rubber pieces under the stand was taller, it will help give the micro usb connector more clearance underneath. What you can do is use a micro usb cable that has a shorter connector at the end. This will alleviate the problem. Overall, this is a very good /versatile stand that most people will like. What I like *Stand size is good size. It’s not too big where it makes it less portable and not too small to accommodate a 10” tablet. *The stand can be used as a tripod to place your phone in landscape/portrait mode to take a photo using the stand. *Pushbutton lock/release is a good idea as this avoids having to use a tool to tighten/loosen the screw. *Rubber padding on the base of the stand helps prevent scratches to the phone/tablet. Plus, it elevates the phone to allow the micro usb connector to be plugged into the phone while it’s in portrait mode. *Rubber padding on the base has a 1mm lip to help prevent the phone/tablet from sliding forward. This should accommodate the device(s) up to .5” thickness *There’s a hole at the base/back of the stand to run the cable through. Some other stands that are similar, don’t have this. What I Dislike *It would be better if the stand was all metal. The rear folding stand made of plastic can eventually bend/warp. This would probably add extra cost to the stand and add more weight. *Wish the rear folding stand would taper out more at the end so it has better balance/support on surfaces that’s not hard/flat. Example would be resting it on a bed. *Rubber padding under the stand needs to raise up a little more. This is to help accommodate a longer micro usb connector to give it more clearance when charging a phone in portrait mode.
  • A nice, sturdy, usefull stand..
    By Petro
    on October 16,2015
    My initial impression is that this item seems to be well made and very well thought out, also feels solid and looks good. Of course only time will tell if the release/lock mechanism will still function after multiple uses. The main body is metal with a nice semigloss black
    My initial impression is that this item seems to be well made and very well thought out, also feels solid and looks good. Of course only time will tell if the release/lock mechanism will still function after multiple uses. The main body is metal with a nice semigloss black finish. The hinge is plastic, but it looks like a sturdy plastic. There are rubber pads on bottom of the main body and on the flat front upper side, even the hinge end is covered in rubber, all providing a non slip grip. The stand can be used at virtually any angle in multiple ways, and the push button-in-hinge will lock and release the hinge, which swings at a full ~300 deg. The thick rubber on the front bottom should be able to accommodate just about any cell phone or iPad, my phone with case is ~ 9/16 " thk and fits fine, in fact, because of that thick rubber base, the stand will probably hold even thicker devices. The other info that is usually hard to find.....the actual dimensions: 4.13" W by 4.375" H by ~ 1.13" thk when lying flat. Even when I'm not using this stand to hold a phone, it comes in handy as a paper weight for my desk or to hold other small items such as paper pads, credit cards, etc that I must see easily while typing on the comp keyboard. So for me, this product has multiple uses.
  • Really Is Sturdy, Light, and Multi Angle!
    By CiscoKid
    on October 28,2015
    OK, I've cobbled up stands out of wood to hold my Kindle Paper White and 8.2" Fire at the proper viewing angle while giving my hands a rest. I did my homemade wood stands because the available stands were no more than cheap plastic that put the devices at risk in use. So, I
    OK, I've cobbled up stands out of wood to hold my Kindle Paper White and 8.2" Fire at the proper viewing angle while giving my hands a rest. I did my homemade wood stands because the available stands were no more than cheap plastic that put the devices at risk in use. So, I decided to try this one and I'm glad that I did. First it is made of light but strong material that holds the 5" wide PW and the 9" wide Fire equally well even though it is only 4" wide and 4 1/2" high itself. It has 12 possible angles achieved by pressing a button in the top hinge which is a good thing because each of my devices requires a different viewing angle. There are non slip cushions where they should be including where the bottom of your device rests. I've ordered a few more as they will make fine gifts for those that seem to have everything. LOL
  • More Reviews >>

Specifications

Model TT-SH019
Package Dimensions 4.7 x 3.7 x 4.7 inches
Unit Weight 4.8 ounces
Condition New
Fit Size 1.85"-3.94" from iPhone 4 to iPhone 6S Plus

 
 
 
 
  car phone mount holder dashboard windshield windscreen taotronics car phone mount holder dashboard windshield windscreen taotronics car phone mount holder air vent taotronics magnetic car phone mount holder taotronics air vent car phone mount cd slot phone mount phone holder taotronics car phone mount holder dashboard windshield windscreen taotronics
             
Width Range 1.97"-3.70" 1.97"-3.94" 1.97"-3.22" General 1.97"-3.94" 1.97"-3.94"
Suitable for Dashboard & Windshield Dashboard & Windshield Air Vent Air Vent CD Slot Dashboard & Windshield
Angle adjust
One touch    
Weight 90g 190g 85g 43g 138g 150g
Compatibility All smartphones and other screen devices of the width 1.97"-3.70" All smartphones and other screen devices of the width 1.97"-3.94" All smartphones and other screen devices of the width 1.97"-3.22" All smartphones and other screen devices All smartphones and other screen devices of the width 1.85"-3.94" All smartphones and other screen devices of the width 1.85"-3.94"
 

Instruction Manuals & Drivers

FAQ

** Amazon Customer Questions & Answers **

The questions and answers below were created by Amazon customers, who are not affiliated or in any way officially connected with TaoTronics. Please follow their advice at your own discretion.

2

votes

Does it allow you to tilt the phone to the left for better viewing angle? Customers are chatting about this View conversation
A: yes it tilts all ways

1

votes

Can you still use the CD player? Customers are chatting about this View conversation
A: You would need to keep removing the mount every time you need to get into a CD. I t used the same slot.

1

votes

Can this be in the cd holder if you have a cd playing? Customers are chatting about this View conversation
A: Yes.

1

votes

Can you use charging cord when in mount & if you already have a cd in there first well the cd play if not you have to take cd out before install mount Customers are chatting about this View conversation
A: Yes you can use the charging cord when phone is in Mount. CD will play with the mount inserted.

1

votes

can I charge the phone while in the standing position? or I have to put in landscape orientation ? Customers are chatting about this View conversation
A: Yes you can. The hole that you see in the back goes down underneath so that the port is accessible for the plug while the iPad is in the vertical position.

1

votes

What is the width of the slot that your device sits in? I have a fat tablet and want to be sure it will sit in the slot. Thx. Customers are chatting about this View conversation
A: The width of the slot is about 1/2" and my device with cover is 3/8". Therefore the device sits in the slot comfortably. The width of the base is 5/8".

0

votes

Has anyone used this with a Note 5 or other large phone with a bulky case? Checking to see if it still fits fine or do you have to remove the case? Customers are chatting about this View conversation
A: I have a Note 5. Works great with it. The side holder part will adjust just fine to fit.

0

votes

Mine keeps falling out. is there a trick to placing it in the cd slot? it doesn't seem to go in very far. if i take a sharp turn it falls out. Customers are chatting about this View conversation
A: I just try to tighten it as much as I can were it doesn't move.

0

votes

Is this cd car charger easy to install? I have purshased other ones for the vent and they didn't work at all! Customers are chatting about this View conversation
A: Works very well i have 3 put one in all my cars buying another one for my work truck now

0

votes

Can you get new silicone pads? Mine got thrown out. Customers are chatting about this View conversation
A: Something like this, cut to desired size. I imagine the fuzzy part of a Velcro strip cut to size would work fine too. Copy+paste into Amazon search bar: 5pcs FPV Silicon Anti-Slip Mat Adhesive Tape for RC Quadcopter Multicopter Battery