TaoTronics HD Security Camera (1080p High Res, 350 Pan / 100 Tilt / Digital Zoom, Wired + Wireless, IR Night Vision, Two-way Audio, Motion Detection, Mobile APP Control)

Technical Specification:

  • Image 1920*1080 HD
  • Resolution 200 M
  • Workable Temperature -10° ~ 55°C (14°F ~ 131°F)
  • Workable Humidity 10% ~ 70%
  • Size 85(L)X85(W)x120(H)mm
  • Unit Weight 267g
  • Storage Method Micro SD Card (up to 64GB)
  • Support Protocol TCP/IP、UDP/IP、HTTP、DHCP、RTMP、MUTP
  • Video Compression H.264

Download :

Sunvalleytek is committed to protecting your privacy. Learn More...

Sunvalleytek is committed to protecting your privacy. Learn More...

•User Manual(for Smart Phone)

88-20005-181_TT-HS005 User Guide (Smartphones) - V1.1(20170306).pdf  

FAQ

Here are the tips: Settings→Motion and Notification→Motion detection→Apply→return to Motion and Notification→Turn alert on
Yes, you just point your browser to http://ehawk.taotronics.com/. However, since you're controlling your IP camera via their web site, any operation has to be sent to their server, passed to your IP camera and then responded back through the same route in reverse. Therefore, don't expect it to be smooth.
If you forgot the password of the camera, there is a reset button(a hoe) under the camera and please press it for 5 seconds, then the camera will be reset to factory default, you access the camera via the new password. However, if you forget your account's password, you need to register a new account and connect the camera to the new account.
Here are the tips: 1)connect the camera with an ethernet cable; 2)settings→network→wifi→choose a known wifi→return to wifi and enter the password of the wifi→roll at the bottom of the page and click apply 3)wait about a minute till the camera connect to the wifi successfully before you unplug the ethernet cable
This SD card issue is caused by a special format generated by the SD card. Our R&D department develop such a camera which can format the SD card to a customized storage format which help protect the video data and accelerate data processing. Here are the tips to let the camera to format the SD card: 1)put the SD card out and unplug the power of the camera; 2)re-insert the SD card into the camera and plug in the power of the camera again; 3)set the camera back to factory default(there is a reset button(a hole) under the camera, pin it for 5 seconds).
The HS005 camera has simplified most setup processes. So there is no need to install app on computer. You can view the camera via a link: http://ehawk.hootoo.com/
If it does, I'm not aware of it. I suppose it's no worse than any of the other electronics that we carry around. So far, it's been a good, reliable purchase.
We are so sorry that our camera does not support any third party appilication currently.
Yes, it can be mounted on the ceiling. It is not battery operated. It comes with a USB power adapter/wire set that plugs into wall outlet. The wire must be connected from the adapter to the camera.
Yes, it does, I'm on vacation in the Philippines, and I can monitor my apartment with WiFi, it's great so far